===============================================================================
ReadMe.txt

PEAK-Flash 1.5.5
Copyright (C) 2022 PEAK-System Technik GmbH, Germany
All rights reserved.
===============================================================================

PEAK-Flash is a Windows application for updating the firmware of PEAK-System
hardware products as well as CAN and LIN adapters.


Contents
--------
  * System requirements
  * Contents of this directory
  * Installation
  * How to contact PEAK-System Technik GmbH


System requirements
-------------------
- Windows 11 (64-bit), Windows 10 (32/64-bit)


Contents of this directory
--------------------------
ReadMe.txt
    This text file.

LiesMich.txt
    This ReadMe file in German translation.

PEAK-Flash.exe
    This is the PEAK-Flash application.
    
PEAK-Flash.exe.config
BitrateSelection.dll
    These files are part of the PEAK-Flash application.

\C++_Redistributable
    Contains the setup for the Microsoft Visual C++ 2015-2019 (x86)
    Redistributable that must be installed to run PEAK-Flash.

\Help
    Contains the files for the Bit Rate Selection dialog help. This folder
    must be located next to the PEAK-Flash application to view the help.


Installation
------------
1. C++ Redistributable:
  a) Please run the 'VC_redist.x86.exe' executable located in the
     'C++_Redistributable' folder.
  b) Accept the license terms and conditions and click on 'Install'.
  c) Wait until the setup is complete.
  
  NOTES: 
  - If you have already installed PEAK-Drivers 4.3.0 or higher, the
    Redistributable may already be installed on your computer. In this case
    the setup displays 'Modify Setup', or it will fail and display that a
    different version of the product is already installed.
  - Local Administrator rights are required to run the installation.

2. PEAK-Flash:
  PEAK-Flash does not need to be installed. Start PEAK-Flash by double-clicking
  on the PEAK-Flash.exe file.


How to contact PEAK-System Technik GmbH
---------------------------------------
If you have any technical questions, please contact our support team at
support@peak-system.com.
